The portable, easy way to clean fine contamination and oils from your liquids.

JCC-HM Micro Bubble Fluid Cleaner / Emulsion Separator

JCC-HM is a Sugino-designed water/coolant treatment unit that utilizes micro bubbles and a Weir and Baffle system to remove oil, debris, metal fines, and contamination from fluid tanks. The micro bubbles lift debris to the surface which is then trapped in the baffle system for removal. This unit offers excellent portability - it can be moved from machine to machine effortlessly - and only requires shop air to operate.

Extend the fluid exchange cycle for cost reduction.

Improve quality with better workpiece cleanliness.

Protect system parts for maintenance cost reduction and fewer stoppages.

Sugino JCC HM oil separator and fluid cleaner

Key Features

Increases water/coolant life and helps to protect important machine components such as pumps and seals

Aerates the fluid bath to help prevent bacterial growth and reduce foul odors

Helps to eliminate residue on finished parts and reduce the cost of fluid chemistry disposal and replacement

NOTE: Water soluble mixtures and emulsions may separate

Air is the Only Power Source Needed

Installation is simple and operation can start immediately. Preparation is complete after connecting just two hoses (IN/OUT) and air.

The JCC-HM is portable and simple to operate. The unit is compact, easy to move on casters, and requires only shop air to operate.

Watch it in action

Example One

Material	ADC transmission parts
Equipment	High pressure washing machine
Issue	Cleanliness deteriorates due to dirt in the cleaning liquid

Example Two

Material	ADC parts
Equipment	Machining Center
Issue	Too many chips in the liquid, and sludge accumulates in the tank

Click to download the information guide for the JCC-HM Fluid Cleaner.

View or Download

Micro Bubbles Remove Debris

Illustration of how Sugino JCC-HM works to clean fluids and cutting oils from liquid

JCC-HM fluid cleaner baffle system for cleaning fluid tanks and oil

Specifications

Throughput

13L/min (air pressure 0.15 MPa)

Air Consumption

40L/min (ANR) (air pressure 0.15 MPa)

Noise

Under 70dB(a) (equivalent noise)

Liquid Temperature

Max. 50° C

Size

W 550 x D 390 x H 370

Weight

35 kg

Tank Capacity

25 L

Utility

Compressed Air

Accessory

Water supply, drainage hoses, cart (option)

Dimensional Drawing (mm)

Have questions? Request a call or email and we'll help you get the answers.

Get in Touch

JCC-HM Exclusive Optional Floating Oil Recovery Unit

Remove both floating oil and oil in the liquid, for better performance.

The optional floating oil recovery unit allows you to add even more functionality - simply connect it to the water supply of JCC-HM. If you are already using the HM, it can be retrofitted to recover oil from both the top of the liquid level, and within the liquid itself.

FEATURES

Efficient, thorough collection of oil and debris.

Recovering both the oil at the surface level and within the liquid, the JCC-HM doubles its processing speed to remove contaminants from your fluid tank.

Other Typical Methods

Collection Area is Limited

With the JCC-HM Optional Floating Unit

Sugino JCC-HM can remove and recover oil from a wide area of the fluid tank, on the surface and inside

Remove oil from more of the tank

Fixes to the tank for stable operation.

In order to stably recover the oil in the liquid level, we adopted a method of fixing it to the tank. In the float type, it is affected by the fluctuation of the height of the liquid level, but by fixing it to the tank and installing it, it will continue to recover the floating oil stably.

In addition, the outer diameter of the unit is reduced to φ110, so it can be installed smoothly even in a tank with a small opening.

The bellows automatically follows the fluctuating level of the liquid.

The bellows portion of the unit can stretch up to a max. of 100 mm, maintaining an optimal position for stable recovery of floating oil at the surface of the liquid.

JCC-HM expanding bellows in the float optional oil recovery unit

Designed to be retrofit to your existing JCC-HM, or added when the situation requires it.

The optional float unit can be attached to an existing JCC-HM processing circuit whenever you need it. Having it on-hand gives you the option to add it later according to the condition of the tank you want to process.

Case Studies

Case Study One - Grinder